Fiber Optic Splitter Terminal Box
- Made of high quality and impact resistant plastics;
- Accommodates 1:4 splitter ( 2 pcs) or 1:8 PLC splitter (1pc);
- Anti-UV, anti-impact and waterproof;
- Wall or pole mounted type Fiber Optic Splitter Terminal Box;
- The toothed slots at the outlet can hold outgoing fibers, which avoids loosening or falling off by external force;
- Teleweaver P/N:
- # FSTB-0208D
- Product ID:
- #2083
Free sample(s) will be sent in 1-3 days usually.
Introduction to Fiber Optic Splitter Terminal Box
The Fiber Optic Splitter Terminal Box body has two opened-type inlets, which realizes operation without breaking the cable. The structural design of the bottom in this fiber splitter box, reversible plate and inner cover make the cable inlet and outlet, fiber splicing area and fiber storage area form a closed and independent partition, which is conductive to manage and maintain
- Categories:
- FTTH Fiber Distribution Box
- Tag:
FAQs on Fiber Optic Splitter Terminal Box
How to Install Fiber Splitter Termination Box
8 steps to well install this Fiber Splitter Termination Box for your application
1. Open Fiber Splitter Termination Box
Open the box with the key, use the special wrench loosen the anti-theft screw (Note: the anti-theft
screw is optional), and press the OPEN position inward to open the inner cover.
2. Choose SC/LC fiber optic adapter and insert
Install the SC adapters in the panel bracket.
3. Strip fiber optic cable to put through fiber splitter box
Strip the cable, remove the outer sheath, inner sheath and shrinkable tube, clear the paste inside the
cable, leaving 0.4~0.8m fiber and 30~50mm steel core; pass the cable into the box through the sealing
rubber at the inlet. lock the cable with a hose clamp, fasten it with the re-enforced steel core.
4 Prepare for Fiber optic pigtails
After the cable is stripped, the fiber is introduced into the splice tray for reserved cooling; the end is
led to the splice groove on the front of the tray and spliced with a fiber pigtail. The other end of the
pigtail is introduced into the bottom of the box and inserted into the lateral adapter.
5. Fix PLC Splitters
Fix the PLC splitter in the special slot, connect the incoming fiber pigtail to the other end of the lateral
adapter, and connect the outgoing pigtails to the adapters installed in the bracket.
6. Fix the inner cover
Close the inner cover and fasten it (Anti-theft screws can be added if necessary)
7. Insert the drop fiber cable
Access the outgoing pigtails: insert the outgoing pigtails into the adapters in turn, lead them out of the
box, make sure the pigtails are in the toothed slots,. Finally close the cover and tighten the screw on it.
8. Install srews for wall mount or bracket for pole mount
Wall mounting: Use four expansion screws to fix the box on the required position (the four yellow O’s
on the left are the actual punching positions); Pole installation: Fixed the box on a pole with 2 hoops.
Fiber Optic Splitter Terminal Box Features
Fiber Optic Splitter Box Accessories
Plastics key: 1 pc
M4x25 plastic expansion screws: 4 sets
F10 ~ F16 hoop: 2 pcs
Heat shrinkable tube L=40mm: optional Stainless steel hoop (155mm-178mm):
optional Interior anti-theft screw and wrenches: optional
Technical Parameters
Optical fiber radius of curvature: ≥30mm
Splice tray additional loss： ≤0.01dB
Working temperature: -10℃ ～+60℃
Side pressure: ≥2000N/10 cm
Impact resistance： ≥20N.m Protection level: IP54
GET FREE SAMPLE NOW
Fiber Optic Splitter Terminal Box Detailed Images
What is Fiber Optic Splitter Terminal Box
This Fiber Optic Splitter Terminal Box integrates the optical fiber splicing, splitting and wiring. you can use this fiber splitter box to access the cable direct or branch connection for client’s terminal . Connecting with the optical communication equipment, through the adapter installed in the fiber optic splitter box in FTTH termination, the drop cable leads the signal out and achieves optical fiber distribution to your terminal customers; also it applies to the protective connection of cables and pigtails; in addition, optical cable can be spliced with home cable after splitting, to achieve signal transmission.
Where to use Fiber Optic Splitter Terminal Box
Fiber optic splitter termination box, here mainly referring to PLC splitter termination box, is a kind of splitter box for fiber optic cable. It is often deployed in FTTH applications for connecting feeder and distribution cables through optical splitters. And it can distribute cables after installing splitters and also can draw out room fiber optic cables in direct or cross-connections. The splitter termination box is suitable for fiber terminal point to complete connection, distribution and scheduling between perimeter fiber cables and terminal equipment, especially suitable for mini-network terminal distribution. Therefore, it is widely applied in FTTH indoor and outdoor terminal applications.
GET FREE SAMPLE NOW
New 8 counts Fiber Optic Splitter Terminal Box 2020 for FTTH
New 8 counts Fiber Optic Splitter Terminal Box 2020 for FTTH
Fiber Optic Splitter Box Accessories
Fiber Optic Splitter Terminal Box Specification
| Type: | FSTB-0208D Fiber Optic Splitter Termination Box |
| Size (mm) L× W× H | 192*132*52 |
| Max splitting | 1:4 (2pcs) / 1:8 (1pc) |
| Weight (Kg) | 0.5 |
| Cable diameter(mm) | ≤ F12 |
| Cable inlet/outlet: | 2 / 8 |
| Fiber core capacity: | 8 (single fiber) |
.png)